Prime Mover™

Classical

A, B, C, D, E

Premium-rated, heavy-duty V-belt. Oil-resistant and static conducting. So versatile it can power virtually every drive in your plant. B and C belts are Unicord® construction 120-300" with tighter tolerances.

Prime Mover™
Cogged

Cogged-Raw Edge

AX, BX, CX

Premium belt has a precision cogged profile base that's designed for uniform stress distribution and superior heat dissipation.

Prime Mover™
Banded and Cogged Banded

Classical

B, C, D

Belt is a unitized set of premium construction belts. Sizes up to 120" I.C. are single cord construction. Those over 120" I.C. are multicord construction.

Maxipower™

Narrow Wedge

3V, 5V, 8V

This wedge-type, multiple drive belt features a deep V design which enables a smaller belt to carry a bigger load. It operates at speeds up to 6,500 feet per minute. 5V and 8V sizes 125-300" are Unicord® construction for tighter tolerances.

Maxipower™
Cogged

Cogged Wedge

3VX, 5VX

Belts are ideal for situations where weight or sheave size is restricted. Unique notched construction distributes bending stress uniformly, and also provides superior heat dissipation.

Maxipower™
Banded

Narrow Wedge Banded

3V, 5V, 8V

Belt designed for difficult applications where lateral vibration and heavy shocks often cause individual belts to whip or turnover.

Maxipower™
Cogged Banded

Cogged-Raw Edge Banded

3VX, 5VX

Belts are cut from a vulcanized sleeve into a unitized belt set. Designed for difficult applications where small sheaves, lateral vibration and heavy shocks often cause individual belts to whip or turnover.

FHP

Fractional Horsepower

3L, 4L, 5L

Belts give cool, quiet service on light machinery, small appliances, home workshop equipment, etc.

PowerPlus™

Extra Duty Aramid

3H, 4H, 5H

Belts are designed to withstand the rigors of tough, frequent usage in lawn and garden and home workshop equipment, as well as in severe industrial drives.

PowerPlus™
Maxiband

Narrow Wedge Banded w/ Aramid Fiber

5VK, 8VK

Belts are designed for high horsepower, high tension, and severe shock load applications such as dredge pumps, hammermills, pile drivers and steel billet grinders.

Multi Ribbed

Multi-Rib

H, J, L, M

Belt is a single endless rubber belt with a series of parallel V-ribs lengthwise around the inside circumference.

Metriflex®

Metric

XPZ, XPA, XPB, SPC

Belts are made to strict European tolerances and specifications to assure a highly accurate fit for metric drives.

Variable Speed

Variable Speed

1422 - 4836

For use on variable speed control drives. Belts operate at low noise levels and are vibration-free.

Double V

Double V

AA, BB, CC

Belts are essentially Prime Mover Belts where either side can be used on a driving surface. They are used on equipment where a number of shafts have to be driven in opposite directions, at the same time, by a single belt.

Kevlar® Cord

Kevlar® Cord

A, B, C, D

Kevlar-reinforced belts offer higher heat resistance than steel cable and minimal stretch.

Novex

Light Duty Urethane

3M, 5M, 7M, 11M

Belts are designed to run over small sheave diameters at high speed ratios. Novex belts allow use of narrow sheaves, small sheave diameters and short centers for compact drives.

Open End Prime Mover™

Open End

A, B, C,

Used on drives not easily accessible for installation of endless belts.

V-Link

Link

00, 0, A, B, C, D, E

Can be quickly and easily installed on most belt drives. It's used when obstructions prevent easy installation of endless belts.

Select Classical

Classical

A, B, C, D

Heavy-duty industrial V-belt versatile enough to power virtually every drive in your plant. Manufactured and produced to tight tolerances, ensuring match-ability. Oil-resistant, heat-resistant, and static-conductive.

Select Classical
Cogged

Cogged-Raw Edge

AX, BX, CX

Heavy-duty V-belts with a precision cogged profile designed for uniform stress distribution and excellent heat dissipation. Construction permits greater flexibility and higher horsepower capacity for exceptional performance.

Select Wedge

Narrow Wedge

3V, 5V, 8V

Value-priced wedge-type belt features a deep V design which enables a smaller belt to carry a bigger load. Operates at speeds up to 6,500 feet per minute. Oil-resistant, heat-resistant, and static-conductive.

Select Wedge
Cogged

Cogged Wedge

3VX, 5VX

Value-priced V-belts ideal for applications where weight or sheave size is restricted. Notched construction distributes bending stress uniformly and offers excellent heat dissipation. Oil-, ozone- and heat-resistant, and static-conductive.

Grip-Tite Timing (Trapezoidal profiles)

Timing

MXL, XL, L, H, XH, XXH

Belts function like timing chains or gears with great success on machines that have extremes in service requirements. Precision-molded teeth engage the mating axial grooves on pulleys in a smooth rolling manner with negligible friction.

Grip-Tite Curvilinear (HTD Profile)

Timing

3M, 5M, 8M, 14M

Belts bring the advantages of synchronous rubber belts to applications previously served by roller chains and gear drives. These belts do not require lubrication and, therefore, maintenance costs are minimized and contamination from oil drips are eliminated.

Grip-Tite PU

Timing

T5, T10, AT5, AT10

Polyurethane (metric) timing belts offer excellent value and rugged performance.

Grip-Tite Curvilinear HT (HTD Profile)

Timing

3M, 5M, 8M, 14M

Heavy-duty timing belts that provide high performance in linear and rotary motion with great precision and angular accuracy in compact environments and confined spaces. Quiet-running and maintenance-free, with no lubrication or re-tensioning required, with service lives up to eight times those of conventional belts.

Grip-Tite Dual (Trapezoidal and HTD Profiles)

Timing

D5M, D8M, D14M, DXL, DL, DH, DXH, DXXH

Timing belts with driving teeth on both sides make it possible to change the direction of one or more synchronized pulleys with only one belt. The inside and outside teeth are identical as to size and pitch.